Komatsu — 30.2 HYDRAULIC CIRCUIT

30. MACHINES READY FOR ATTACHMENT 30. MACHINES READY FOR ATTACHMENT 30.2 HYDRAULIC CIRCUIT SWITCHING HYDRAULIC CIRCUIT When installing an attachment or installing a bucket, set right 3- way valve 1 installed to the hydraulic circuit as follows. Use a wrench to rotate the rotor and match the attachment and the direction of right 3-way valve 1 as shown in the table below. (The arrow showing the direction of the port is stamped on the head of the 3-way valve.) AM092020 NOTICE When installing a breaker, connect the return circuit directly to the return filter. The standard set pressure for the low-pressure safety valve is set at 20600 kPa (210 kg/cm 2 , 2990 psi) when shipping from the plant.

When installing breakers made by other manufacturers, it is necessary to adjust the pressure, so please contact your Komatsu distributor. 5-11 Attachment Right 3-way valve Breaker, etc. Right of machine G Crusher, etc. Right of machine V When not using Right of machine B