ELECTRICAL SYSTEM - DISASSEMBLY, INSPECTION AND REASSEMBLY (1) Separating the front bracket from the stator core With flat-head screwdrivers positioned between the front bracket and the stator core, pry them away from each other. Do not insert the screwdrivers too deep, as it can damage the stator core. (2) Removing the pulley (a) Protecting the rotor with cloth, place the front bracket and rotor assembly in a vice. Remove the pulley nut, then remove the pulley and the spacer. (b) Pull out the rotor from the front bracket. (3) Removing the stator core and the rectifier (a) Unsolder the stator core leads at the rectifier. Remove the stator core.
Separating the front bracket from the stator core Removing the pulley Rectifier Soldered lead Unsoldering must be finished as quickly as possible. Extended heating will damage the diodes. (b) Loosen the retaining screws and remove the rectifier. Soldered lead Removing the stator core 7 - 19