Mitsubishi — Mitsubishi Diesel Engine Service Manual

ENGINE - INSPECTION / ADJUSTMENT, RUNNING-IN TRIAL AND PERFORMANCE TEST 1.3 Adjusting the valve clearance (1) Loosen the rocker arm nut. Using a thickness gauge, set the valve clearance to the standard value by screwing in or out the adjusting screw. Unit: mm (in.) (2) While holding the adjusting screw to prevent it from turning, tighten the nut. Adjusting the valve clearance If the valve clearance is adjusted during engine overhaul, check the valve clearance again after rotating the crankshaft a couple of turns. 8 - 3 Standard value Valve clearance Inlet 0.25 (0.01) Exhaust 0.25 (0.01)