GENERAL 2. Specifications 1 - 7 Engine Type S3L S3L2 S4L S4L2 General Type Water-cooled; 4-stroke cycle; Diesel powered No. of cylinders 3 4 Combustion Swirl chamber type Valve mechanism Overhead valve type Cylinder bore×stroke mm (in.) 78×78.5 (3.07×3.09) 78×92 (3.07×3.62) 78×78.5 (3.07×3.09) 78×92 (3.07×3.62) Total displacement l (U.S. gal) 1.125 (0.297) 1.318 (0.348) 1.500 (0.396) 1.758 (0.464) Compression ratio 22.0 :
1 Fuel Diesel fuel (JIS K2204 Special 1 - 3) Firing order 1-3-2 1-3-4-2 Direction of rotation Counterclockwise when viewed from the flywheel end Dimensions Overall length mm (in.) 536 (21.10) 620 (24.40) Overall width mm (in.) 433 (17.04) 433 (17.04) Overall height mm (in.) 572 (22.52) 572 (22.52) Dry mass kg (lb) 135 (297.6) 155 (341.7) Engine main parts Piston ring No. of rings Compression ring :2 Oil ring (w/expander) :
1 Valve timing (hot engine) Inlet valve Open BTDC 15° Close ABDC 41° Exhaust valve Open BBDC 54° Close ATDC 10° Engine mounting 4 mounts Starting method Starter Fuel system Injection pump Type Bosch M Manufacturer DENSO Plunger mm (in.) diameter φ5.5 (0.21) MS retard (crank angle) 8° Cam lift mm(in.) 15 (0.59) Governor Governing method Centrifugal fly-weight type Injection nozzle Type Throttle nozzle Manufacturer Bosch Automotive Systems Corporation Spray angle mm (in.) 15° MPa Opening (kgf/cm2) pressure [psi] 14.22 to 15.00 (145 to 153) [2062 to 2176] Fuel filter Type Paper-element cartridge; Separate type w/ cock Oil system Lubrication method Forced circulation (pressure feed by trochoid pump) Engine oil Grade CD Class (API Classification) Capacity l (U.S.
gal) (entire engine) 3.7 (1.0) 4.2 (1.1) 5.4 (1.4) 6.0 (1.6) Oil pump Type Gear pump l (U.S. gal) Displacement /min 18 (4.8) Relief valve Type Piston valve MPa Opening (kgf/cm2) pressure [psi] 0.35±0.05 (3.6±0.5) [51±7] Oil filter Type Paper element (spin-on type)