Mitsubishi — Mitsubishi Diesel Engine Service Manual

ENGINE MAIN PARTS - DISASSEMBLY 1.1 Removing the rocker shaft assembly (1) Loosen the rocker stay bolts. Remove the rocker shaft assembly together with the rocker stay bolts. (2) Remove the valve caps. (3) Keep the rocker shaft assembly with the rocker stay bolts. 1.2 Disassembling the rocker shaft assembly In the course of disassembly, place removed valve rockers as well as the other parts neatly in the order of disassembly so that they can be reassembled back onto their original locations. Doing so, original clearances between the valve rockers and the rocker shaft is restored upon reassembly.

1.3 Removing the cylinder head bolts Loosen the cylinder head bolts in the order of the numbers illustrated. Do not loosen one bolt completely before moving to the next bolt. Loosen the bolts in a couple of steps. Note: Before removing the cylinder head bolts, check the cylinder head components for any fault. If faulty, check the bolts for tighteness with a torque wrench. Removing the rocker shaft assembly Disassembling the rocker shaft assembly 1 7 9 6 4 3 5 10 8 2 S4L, S4L2 12 14 13 11 Front of engine 1 7 5 2 9 6 4 3 10 8 11 S3L,S3L2 Tightening order for cylinder head bolts 2 - 3