Mitsubishi — Mitsubishi Diesel Engine Service Manual

ENGINE MAIN PARTS - DISASSEMBLY 2.9 Removing the idler gear Remove the idler gear by sliding it out along the helical teeth. 2.10 Removing the camshaft (1) Remove the thrust plate retaining bolts. (2) Gently pull out the camshaft, taking care not to damage it. Removing the idler gear When pulling out the camshaft, pay attention to the cams as they tend to be caught by the surrounding parts. Pulling out the camshaft 2.11 Removing the fuel injection pump camshaft (1) Remove the stopper bolt (one place). (2) Using a copper rod or other similar tool, tap the rear end of the fuel injection pump camshaft. Then, pull it out to the front of the engine.

2.12 Separating the gears from the shafts (as required) Using a hydraulic jack, remove the camshaft gear and the fuel injection pump camshaft gear from the respective shafts. Removing the pump camshaft stopper bolt Removing the pump camshaft 2 - 10