ENGINE MAIN PARTS - DISASSEMBLY 2.7 Removing the timing gear case Remove the timing gear case retaining bolts. Then, remove the timing gear case. The front plate is bolted in place separately from the timing gear case. Do not attempt to tap away the front plate together with the timing gear case. 2.8 Measuring the timing gear backlash Measure the backlash between the gears and use the measurements as references upon reassembly. If any of the measured values exceeds the limit, replace all gears unless otherwise specified. Unit:
mm (in.) Removing the timing gear case Front plate retaining bolts Measuring the timing gear backlash 2 - 9 Standard value Limit Timing gear backlash Crank gear - idler gear 0.04 to 0.12 (0.0016 to 0.0047) 0.30 (0.0118) Idler gear - valve camshaft gear Idler gear - pump camshaft gear Valve camshaft gear - PTO gear 0.08 to 0.19 (0.0031 to 0.0075) Pump camshaft gear - oil pump gear 0.07 to 0.20 (0.0028 to 0.0079)