ENGINE MAIN PARTS - DISASSEMBLY 3.8 Separating the piston from the connecting rod (1) Remove the piston pin using the special tool Piston Pin Setting Tool. (2) Insert the tool’s push rod into the piston pin hole. Using a press against the push rod, extract the piston pin. (3) Use the Piston Pin Setting Tool again to reassemble the piston and the connecting rod. Piston Pin Setting Tool Push rod Piston pin Piston arrow mark Connecting rod Identification mark Piston Tool body Removing the piston pin (1) Do not try to remove the piston pin by tapping it. If the piston has been agglutinated and requires a great force to remove, replace it with a new part.
Removing the piston pin (2) 2 - 15 Special tool Part number Piston Pin Setting Tool 31A91-00100