Mitsubishi — Mitsubishi Diesel Engine Service Manual

ENGINE MAIN PARTS - REASSEMBLY 3.9 Assembling the rocker shaft assembly (1) Assemble the rocker shaft components to ensure the correct reassembly and tighten the retaining bolt. (2) Ensue that the rocker arms move smoothly. 3.10 Installing the rocker shaft assembly (1) Install the valve caps. (2) Install the rocker shaft assembly onto the cylinder head. Tighten the mounting bolts to the specified torque. 3.11 Adjusting the valve clearance Refer to “1.3 Adjusting the valve clearance” on Page 8-3. 3.12 Installing the rocker cover (1) Ensure that the rocker cover is correctly fitted with gasket. (2) Tighten the rocker cover retaining bolts to the specified torque.

Retaining bolt Assembling the rocker shaft assembly Tightening torque: 9.81 to 19.6 N m (1.0 to 2.0 kgf m) [7.2 to 14.5 lbf ft] Installing the rocker shaft assembly Adjusting the valve clearance Tightening torque: 9.81 to 12.7 N m (1.0 to 1.3 kgf m) [7.2 to 9.4 lbf ft] Installing the rocker cover 2 - 46