Komatsu — STARTING IN COLD WEATHER

OPERATION OPERATION 1. Set fuel control dial (1) at the low idling (MIN) position. AM090340A 2. Hold the key in starting switch (1) at the HEAT position, and check that preheating monitor (2) lights up. After about 30 seconds, preheating monitor lamp (3) will flash for about 10 seconds to indicate that preheating is finished. HEAT OFF REMARK The monitor and gauge also light up when the key is at the HEAT position, but this does not indicate any abnormality. ON START AM090380A 3. When preheating monitor (3) flashes, turn the key in starting switch (2) to the START position to start the engine. HEAT OFF ON START AM090390A 4. When the engine starts, release the key in starting switch(2).

The key will return automatically to the ON position. HEAT OFF ON START AM090360A 115 Ambient temperature Preheating time Above 0° C - 0°C to -10°C 20 seconds -10°C to -20°C 30 seconds