OPERATION OPERATION OPERATIONS AND CHECKS AFTER STARTING ENGINE Emergency stop If there has been any abnormal actuation or trouble, turn the starting switch key to the OFF position. If the work equipment is operated without warming the machine up sufficiently, the response of the work equip- ment to the movement of the control lever will be slow, and the work equipment may not move as the operator desires, so always carry out the warming-up operation. Particularly in cold areas, be sure to carry out the warm- ing-up operation fully. WHEN NORMAL NOTICE When the hydraulic oil is at a low temperature, do not carry out operations or move the levers suddenly.
Always carry out the warming-up operation. This will help to extend the machine life. Do not suddenly accelerate the engine before the warm- ing-up operation is completed. Do not run the engine at low idling or high idling continu- ously for more than 20 minutes. This will cause leakage of oil from the turbocharger oil supply piping. If it is necessary to run the engine at idling, apply a load from time to time or run the engine at a mid-range speed. 116 WARNING