108 Operator’s Manual Vehicle Maintenance CXU, CHU, GU, TD, MRU and LEU The simplest method to clean the package is to use air pressure or a water stream. This should be done from the back of the core. Air pressure should not exceed 30 psi (200 kPa) for radiator and charge air cooler cores. The use of a fin comb is also a good tool to loosen bugs and dirt from the fins. If dirt cannot be cleaned off with this procedure, consult your MACK Truck dealer. W2001496 Cleaning Charge Air Cooler and Radiator (typical radiator shown) Inspect the charge air cooler for cracks at every inspection. DO NOT operate the vehicle with a damaged or broken charge air cooler.
To do so would void the warranty and the engine will not meet emission regulation requirements.