Mack Trucks — PV776-21394653.pdf

Operator’s Manual Vehicle Maintenance CXU, CHU, GU, TD, MRU and LEU 109 Preventive Maintenance Air Suspensions Note: The following maintenance items should be performed on all air suspensions (including MACK AL, AL II, AL-401LH, MAXAIR 40/40A, MAXLITE 2040, MAXLITE 2040 EZ and Hendrickson PRIMAAX) at each B, C and D inspection interval, or every 40 234 Km (25,000 miles) or six months, whichever comes first. Visual Inspection: Inspect all suspension components, checking for signs of wear, damage or unwanted movement. Loof for bent or cracked parts. Replace all worn or damaged components as required. Air Spring: Inspect for chafing or any signs of spring or components damage.

Ensure that the upper bead plate is tight against the underside of the frame. Check for lateral slippage at the lower air spring bracket. Slippage of 3.3 mm (1/8 inch) in either direction is acceptable. Replace worn or damaged components as required. Support Beam Assembly: Inspect the overall condition of the support beam for dents, dings or other damage. On Hendrickson PRIMAAX suspensions, check the D-pin bushings for tearing or extreme bulging. Check for metal-to-metal contact in the bushed joints. Replace worn or damaged components as required. Frame Hanger Bracket: Inspect for any signs of loosening or damage.

On Hendrickson PRIMAAX suspension, check for loosening or damage at the QUIK-ALIGN connections or longitudinal torque rod connections. Replace worn or damaged components as required. Cross Beam: Inspect for cracks, damage, metal shavings or looseness at the beam connections. Replace worn or damaged components as required. Transverse Torque Rods: Inspect for signs of looseness at the transverse torque rod connections. Check bushings for tearing or excessive bulging. Check the transverse torque rod for dents or bending. Replace worn or damaged components as required. Shock Absorbers: Inspect for signs of dents or leaking (oil misting is not considered leakage).

Replace worn or damaged shocks as required. Tire Wear: Inspect tires for wear patterns that might indicate suspension damage or misalignment. Replace worn or damaged components as required. Height Control Valve and Air Lines: Check for loose, bent or damaged parts. Check air lines for chafing or any unwanted contact with moving components. Check height control valve and air lines for leakage. Replace worn or damaged components as required.