116 Operator’s Manual Vehicle Maintenance CXU, CHU, GU, TD, MRU and LEU Wheel Nut Tightening After the initial tightening, retightening must be made within the first 800 Km (500 miles). After the first retightening, only normal inspection of nut tightness is needed. Check front and rear wheel nut tightness with a torque wrench. All disc wheels for MACK vehicles have a tightening torque of 610 Nm (450 lb-ft). Tighten the nuts in the correct sequence. Inspect bolts and nuts for signs of wear or cracks. Make sure that the bolts are not bent. This tightening check is particularly important when rims or brake drums are newly painted.
Paint can flake off from these surfaces, causing the nuts to lose their grip and the wheel to loosen. W7001392 10-Stud Wheel Nut Tightening Sequence DANGER Failure to properly torque-tighten the wheel nuts can result in the breakage of wheel studs and the subsequent loss of wheels. This can lead to loss of vehicle control and serious personal injury or death.