Operator’s Manual Vehicle Maintenance CXU, CHU, GU, TD, MRU and LEU 117 Tire Inflation and Wear Remove stones lodged in ribs or in between double-mounted wheels. Check the tire pressure and leak-test the valve stems. W7001270 Measure the tread depth. The depth should not be less than 4.8 mm (6/32-in) on front tires and not less than 1.6 mm (2/32-in) on drive tires. Most premium steer tires start with 14.2 mm (18/32-in) tread depth when new. Usually remove steer tires at 4.8 mm (6/32-in). Drive tires should be removed at not less than 1.58 mm (2/32-in). It is important to have the wheels correctly aligned. Check for uneven tire wear frequently.
Uneven tire wear is a sign of wheels out of alignment. WARNING DO NOT operate the vehicle with under-inflated tires. Always keep your tires inflated to the manufacturers recommendation. Increased flexing in the tire sidewall produces heat. The heat can build to the point of blowing the tire out causing an accident. WARNING Check tire pressure when the tire is cool. Never bleed the air from hot tires. Increased tire pressure measured in a hot tire is normal. Low pressures may cause side wall flexing, resulting in increased heat, leading to tire failure and vehicle accident.