mercedes-benz — Technical specifications

01 Engine 0115 Engine unit 1044-004 100 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 Value CCN Remark / designation 6 Coat thrust washers with engine oil. Do not replace thrust washers individually. When a thrust washer is no longer OK, all thrust washers must be replaced. 7 Gear of crankshaft Page 96 b up to 0.15 mm Maximum radial runout at the centre main crankshaft journal c Diameter of main and flange bearing journal Standard: 85.990 to 86.010 mm Deviation 0.1: 85.890 to 85.910 mm Deviation 0.25: 85.740 to 85.760 mm Deviation 0.5: 85.490 to 85.510 mm Deviation 0.75: 85.240 to 85.260 mm Deviation 1.0:

84.990 to 85.010 mm d 31.0 to 31.2 mm Width of main bearing journal e Width of flange bearing journal Standard: 31.000 to 31.062 mm Deviation 0.1: 31.000 to 31.062 mm Deviation 0.25: 31.300 to 31.362 mm Deviation 0.5: 31.500 to 31.562 mm Deviation 0.75: 31.500 to 31.562 mm Deviation 1.0: 31.500 to 31.562 mm f Inner diameter of crankshaft main and flange bearing Standard: 86.066 to 86.108 mm Deviation 0.1: 85.966 to 86.008 mm Deviation 0.25: 85.816 to 85.858 mm Deviation 0.5: 85.566 to 85.608 mm Deviation 0.75: 85.316 to 85.358 mm Deviation 1.0: 85.066 to 85.108 mm g 0.056 to 0.118 mm Radial play k 0.16 to 0.38 mm Axial play Tightening torques not specified, see section on tightening torques