mercedes-benz — Removal

01 Engine 0115 Engine unit 1044-004 Removal ►Remove the engine. See the repair manual of the machine in question. ►Remove the oil pump. Page 194 ►Remove the timing housing. Page 77 ►Remove all pistons. Page 85 ►Remove the crankshaft gear. Page 96 ►Remove the main bearing cover (1). ►Check if the mark exists and mark the main bearing cover if necessary. ►Remove the flange bearing cover (2). ►Remove thrust washers. 1 1 1 2 107 188820-001 ►Remove bearing shells (1). ►Mark the bearing shells with respect to bearing (2) or (3). 2 1 3 1 108 187006-001 ►Lift out the crankshaft with a suitable lifting equipment.

00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 101 Value CCN Remark / designation l Material thickness of thrust washers Standard: 3.240 to 3.310 mm Deviation 0.3: 3.390 to 3.460 mm Deviation 0.5: 3.490 to 3.560 mm m 134 to 136 mm Shaft length of bolt of main and flange bearing cover (4) Tightening torques not specified, see section on tightening torques