01 Engine 0115 Engine unit ►Remove bearing shells from the crankcase. ►Mark bearing shells with respect to bearing (2) or (3) in the crankcase. ►Clean the crankshaft. 1044-004 1 ►Clean the main channel. Page 180 2 1 3 187007-001 109 Checking ►Check crankshaft for damage and cracks, replace the crankshaft if necessary. 2 4 1 3 183067-001 110 ►Checking the bearing shells: 1 Bearing housing without damage. ►The surface is even and smooth, without visible scores and without run-in wear. The bearing shell can be re-used. 2 Bearing shell with minor anti-friction layer wear. ►Scores are hardly visible on the surface. The bearing shell can be re-used.
3 Bearing shell with large-surface anti-friction layer wear. ►The run-in layer has been removed, the wear spot is clearly visibly. Replace all bearing shells. 4 Bearing shell with edge wear. ►The bearing shell shows clear signs of wear on one or both outer edges. ►Possible reasons: ►Conical journal of crankshaft. ►Hollow-ground journals of the crankshaft. ►Conical bores in the crankcase. ►Hollow bores in the crankcase. 102 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014