mercedes-benz — Checking the valves

01 Engine 0120 Cylinder head / Valves / Idler gear 1044-004 Installation instructions Removal: Remove the valve springs. Page 139 Installation: Check the valves. Install the valve springs. Page 140 Checking the valves ►Remove fouling deposits on the valves by means of a wire brush. ►Ensure that the valves have no seizing traces or cracks. ►Check the specified dimensions of the valves. a2301265 155 171650-001 130 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 Value CCN Remark / designation d Valve stem Intake: 7.935 to 7.950 mm Exhaust: 7.925 to 7.940 mm e Valve seat width at the valve head Intake: 3.19 mm Exhaust: 3.35 mm f Valve seating face Intake: 31.0 mm Exhaust:

36.0 mm g Valve seating face machining dimension Intake: 2.7 to 3.1 mm Exhaust: 2.5 to 3.2 mm Tightening torques not specified, see section on tightening torques