01 Engine 0120 Cylinder head / Valves / Idler gear Adjusting the valve lash 1044-004 =E =A 1 2 3 4 5 6 234557-001 156 ►Set cylinder 6 to overlap TDC. Cylinder 1 at ignition TDC . ►Adjust the corresponding exhaust (A) and intake valves (E). ►Set cylinder 1 to overlap TDC. Cylinder 6 at ignition TDC. ►Adjust the corresponding exhaust (A) and intake valves (E). Check and adjust valve lash only on a cold engine. 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 131 Value CCN Remark / designation 1 - 8 Cylinder 1 to 6 A 0.60 mm Valve lash of exhaust valves Test tolerance: +0.1 / -0.1 mm E 0.40 mm Valve lash of intake valves Test tolerance:
+0.05 / -0.05 mm Tightening torques not specified, see section on tightening torques Crankshaft position 1 2 3 4 5 6 Cylinder 6 at overlap TDC E/A E A E A - Cylinder 1 at overlap TDC - A E A E E/A