mercedes-benz — Adjusting the valve lash

01 Engine 0120 Cylinder head / Valves / Idler gear ►Remove the valve covers. Page 119 1044-004 ►Rotate the crankshaft to the corresponding crankshaft position as described in the Cranking the engine chapter. Page 54 Use special tool (I). Page 128 1 3 ►Check the distance between the valve bridge and the rocker lever at (3). If the deviation exceeds the allowed test tolerances, adjust the valve lash as follows: 2 ►Slacken off lock nut (1). ►Turn out adjusting bolt (2) a little. ►Insert feeler gauge at (3). ►Readjust adjusting bolt (2) until the feeler gauge can be just pulled through. ►Tighten lock nut (1). ►Tightening torque:

Page 133 Intake valves 234560-001 157 1 3 2 158 Exhaust valves 234559-001 132 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014