mercedes-benz — Installation

01 Engine 0125 Injection - / Fuel system 1044-004 Value 7 8 Removal ►Remove the cylinder head injection line. Page 155 ►Unscrew wiring loom at (1). 1 213 235223-001 Use special tool (I). Page 167 ►Unscrew bolts (1) of plug-on pump (2) by only 4 to 5 mm. ►The plug-on pump is spring-loaded! ►Crank the engine if required to reduce the spring force. ►Remove plug-on pump (2) carefully. ►Do not lever out the plug-on pump at the valve or at the housing (3)! ►Unscrew bolts (1) carefully and remove plug-on pump (2) completely. ►If necessary, mark the plug-on pump with respect to the cylinder in question.

1 I 2 3 235224-001 214 Installation ►Turn engine until the corresponding cam of the plug-on pump is set to the base circle. ►See the "Cranking the engine" chapter. Page 54 ►Check the plug-on pump for damage. 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 169 CCN Remark / designation Cylinder head injection line Page 155 Plug-on pump cam (camshaft) Page 148 ot specified, see section on tightening torques