01 Engine 0165 Exhaust gas treatment Technical specifications 1044-004 7 6 13 6 1 13 4 3 7 12 5 8 9 9 5 8 11 2 10 186231-001 379 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 267 Value CCN Remark / designation 1 5.5 kg M25-MB (M047) Urea pump Position of pump: See chapter "Location of components" in the relevant Technical Systems documentation. 2 3.2 ± 0.2 bar Pressure accumulator – Replace O-ring in every installation process. – Apply a thin coat of silicon grease to the pressure accumulator and the O-ring. - Use only the specified silicon grease. 3 Dump valve – Replace the O-rings every time when assembling. – Coat O-rings slightly with silicon grease.
- Use only the specified silicon grease. 4 Intake filter 5 Urea intake line 6 Urea feed line 7 Urea return line Tightening torques not specified, see section on tightening torques