01 Engine 0165 Exhaust gas treatment ►Unscrew sensor (B128-MB) carefully. ►Take the remaining system pressure into account. 1044-004 B128-MB 236419-001 410 ►Fill water into drilled hole (1) until the drilled hole overflows. 1 236420-001 411 ►Screw on sensor (B128-MB). ►Tightening torque: Page 279 B128-MB 412 236419-001 Use special tool (II). Page 277 ►Bolt down special tool (II) at (1). a II ►Fill as much water into the flushing hose to produce a water column (a) of 4 cm. ►To apply the water to the test connection, keep the flushing hose in a high position. ►Apply flushing hose with compressed air until the water has completely disappeared. ►Do not exceed a maximum pressure of 5.5 bar!
►Remove special tool (II). ►The test connection may remain on the urea dosing unit. 1 413 236421-001 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 281