Safety General Information ►Persons wearing a pacemaker must not come closer than 20 cm to the running engine. ►Any modifications of the original engine cabling may result in exceeding threshold values of the pacemaker regulations. 1044-004 Cleanliness Diesel injection components consist of high-precision parts that are subject to extreme loads. In view of this high-precision equipment, maximum cleanliness must be ensured during all work on the fuel system. Even dirt particles measuring more than 0.002 mm may make components fail. Before starting work, absolutely comply with the rules below: ►Clean engine and engine compartment before starting the work.
►Ensure that the fuel system is closed here. ►When using a jet cleaner, do not aim directly on electric components or fit covers. ►Clean tools and working materials before starting work. ►Use only undamaged tools. ►Cover up engine compartment areas where dirt particles may come off with a new and clean dust film. ►Wash your hands before starting dismounting and put on fresh working clothing. ►Carry out a visual inspection for leaks and damage on the fuel system. ►Remove any loose dirt particles such as paint chips and insulation material with a suitable suction device.
►When removing and installing components, no materials such as cloths, cardboard or wood may be used as these materials may lose particles and fibres. ►Carefully remove paint chippings resulting from slackening off bolts before completely removing the bolts. ►Place the engine in a clean area of the workshop where no work is carried out that raises dust. ►Avoid air motion (possible raising of dust by starting engines, workshop ventilation or heating system, air draught etc.). ►Clean and dry the area of the still closed fuel system with compressed air. ►After opening the clean-side fuel system, use of compressed air for cleaning is no longer allowed.
►Use only non-fluff cleaning cloths on the fuel system. ►Close connecting openings of all removed parts of the clean-side fuel system immediately with suitable caps. 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 45