mercedes-benz — Engine overhaul

Safety General Information ►Caps must be packed dust-tight before use and must be disposed of after using them once. ►Keep components carefully in a clean and closed container. ►Never use pre-used cleaning or testing liquids for these components. ►New parts may be taken out of their original packaging only just before using them. ►Carry out work on removed components only at a workplace equipped for this purpose. ►If removed parts are dispatched, always use the original packaging of the new part. 1044-004 Installation instructions ►Piping of all kinds must not be bent, risk of cracking! ►Regulations for flawless installation of flat seals: ►Only use genuine CLAAS seals.

►Sealing faces must be undamaged and clean. ►Do not use any sealants or glues. ►Tighten bolts evenly to the specified torque. ►Regulations for flawless installation of round seals: ►Only use genuine CLAAS seals. ►Sealing faces must be undamaged and clean. ►Always wet O-rings with engine oil according to the manufacturer's specification when installing. Engine overhaul The service life of an engine is influenced by very different factors. Specifying a certain number of operating hours for basic overhauls is therefore not possible.

Opening an engine or a basic overhaul is not appropriate as long as the engine has good compression values and the following operating values have not significantly changed as compared with those measured and accepted upon commissioning: ►Charge pressure. ►Exhaust gas temperature. ►Coolant and lubricating oil temperature. ►Oil pressure and oil consumption. The criteria below have major influence on the engine's service life: ►Smoke behaviour. ►Correct setting of output, depending on the type of use. ►Proper installation. 46 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014