Safety General Information ►Acceptance of installation by authorised personnel. ►Regular maintenance according to the maintenance schedule. ►Selection and quality of lubricating oil, fuel and coolant according to the manufacturer's specifications. 1044-004 Putting into operation after an engine overhaul Pre-fill the engine with engine oil after finishing repair, i.e. in dry condition, before putting it back into operation. This process can also be applied when establishing damage and reasons.
On all engines that have not been pre-filled with lubricating oil, the danger of premature damage to the bearing surface is very big because the lubrication oil fed by the oil pump from the oil sump takes relatively long before it reaches the individual bearings. Such initial damage will not necessarily make the bearings fail, but can affect bearing function and reduce the service life. Pre-filling the engine with engine oil: Page 178 123242-003 First aid measures Inhaling: Give the person fresh air and consult a doctor depending on his or her symptoms. Remove the person from the danger area. Contact with the eyes: Rinse the eyes thoroughly with large amounts of water for several minutes.
Consult a doctor if required. Contact with the skin: Wash thoroughly with plenty of water and soap, remove polluted and soaked clothing immediately, consult a doctor if the skin is irritated (e.g. reddening). Swallowing: Do not induce vomiting; consult a doctor immediately. 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 47