Driving and Operation 12. : Motor system fault indicator light This indicator light is used to monitor the working status of the motor drive system. When there is a fault in the motor system, this indicator light is ON. OFF, the smart speed limit function OFF indicator light (white) is ON. When the intelligent speed limit function fails, the intelligent speed limit function fault indica-tor light (yellow) is ON. When the smart speed limit function is in standby, the smart speed limit function standby indi-cator light (gray) is ON. This light indicates whether the ESC system is OFF. When the ESC sys-tem is OFF, this light is ON. 18. :
Tire pressure system fault indicator light When the keyless start/stop button is in "RUN" mode, this light is ON for self-test and goes out after self-test. If this indicator light dose not turn off after the self-check or is normally on during driving, it indicates abnormal tire pres- sure. If it does not go out after self-test or the indi-cator light flashes for 60s and then stays on while driving. Indicates there is a trouble in the tire pressure system. When encountering the above situations, pull over under safe conditions and inspect the tire conditions. 13. :
Indicator light for the driver's and passenger's seat belts not fastened When the “Keyless Start/Stop” button is in the “RUN” position, if the driver and front passenger are not wearing seat belts, this indicator goes on. After a period of driving, it triggers an audible alarm. The indicator goes off when the seat belt is properly fastened, meaning the seat belt tongue is inserted into the seat belt buckle. 16. : Automatic lane change assist lane changing indicator light* When the automatic lane change assist system is changing lanes, the automatic lane change as-sist lane indicator light (green)is ON.
When the automatic lane change assist system can change lanes, the automatic lane change as-sist lane changeindicator light (white) is ON. When the automatic lane change assist system fails to change lanes, the automat- ic lane change assist lane change failure indicatorlight (yellow) is ON. 14. : Traffic sign indicator light This indicator light indicates the sign information detected by the traffic sign identification system. 19. : GPF (gasoline particulate filter) requiring regeneration indicator light When the particulate filter requiring regeneration, the indicator light (yellow) is ON. When the particulate filter active regener- ation, the indicator light (green) is ON. 15. :
Smart speed limit function on indi- cator light When the smart speed limit function is activated, the smart speed limit function is ON on indi-cator light (green). When the smart speed limit function is 17. : ESC OFF indicator light When the keyless start/stop button is in the "RUN" position, this indicator light will be on for a fews and then go off. 122 | Driving and Operation