Driving and Operation When the particulate filter requiring maintenance, the indicator light (red) is ON. High Beam Assist standby indicator (white) goes on. When the intelligent high beam light assist system is activated, the intelligent high beam assist on indicator light (green) is ON. When the lane departure assist system fails, the lane departure assist fault indi- cator light (yellow) is ON. 20. : Lighting system fault indicator light This indicator light indicates the status of the vehicle's exterior lights. When the vehicle's exte-rior lights fail, this light turns on. If the indicator light is on while driving, Please stop and check the exterior lights when it is safe to do so. 25.
: Integrated Adapted Cruise Control working indicator light When the Integrated Adapted Cruise Control system is activated, the Integrat- ed Adapted Cruise Control system work- ing indicator light (green) is ON. When the Integrated Adapted Cruise Control system is in standby state, the Integrated Adapted Cruise Control system standby indicator light (white) is ON. When the Integrated Adapted Cruise Control system fails, the Integrated Adapted Cruise Con-trol system fault indicator light (yellow) is ON. 24. : Lane departure warning ON indica- tor light When the lane departure warning system is normally activated, the lane departure warning on indicator light (green) is ON.
When the Lane Departure Warning (LDW) system is in standby mode, the Lane Departure Warning (LDW) stand- byindicator light (white) lights up. When the Lane Departure Warning (LDW) system is failure, the failure indi- cator light (green) for the LDW system illuminates. When the lane departure assist system is normally activated, the lane departure assist on indica-tor light (green) is ON. When the lane departure assist system is in standby mode, the lane departure assist standby in-dicator light (white) is ON. 21. : Rear fog lamp indicator lamp When the rear fog light is turned on, the indicator light is on. 22. :
Front fog lamp indicator lamp When the front fog light is turned on, the indicator light is on. 23. : Intelligent high beam ON indicator light When the intelligent high-beam light aux- iliary system fails, the intelligent high-beam auxiliary fault indicator light (yellow) is ON. Please contact a BAIC authorized dealer for processing. When the Intelligent High Beam Assist system is in standby mode, the Intelligent 26. : Oil pressure indicator light When the keyless start/stop button is in "RUN" mode, this light is ON for self-test, and goes out after the engine is started. If the warning light is ON after the engine is started, it means that the engine oil pressure is low.
At this time, you should stop the vehicle immediately Driving and Operation | 123