Driving and Operation Electronic parking brake system Apply electronic parking brake parking brake indicator light is ON in the instrument cluster. Automatic release The electronic parking brake can be auto- matically released when any of the follow- ing conditions are met: Release the electronic parking brake When the keyless start/stop button is in “RUN” mode and on level ground, with the doors closed and the seat belt fastened, and the electronic parking brake is released automatically when the gear is shifted from P to D or R. The parking brake indicator light goes out in the instrument cluster.
The “Keyless Start/Stop” button, when in “RUN” mode and on a slope, with the doors closed and seat belts fastened, and the gear lever in D or R, releasing the electronic parking brake is possible by depressing the accelera- tor pedal to a certain depth. The park- ing brake indicator in the combination instrument will go off. Manual application Manually release When the vehicle is stationary, pull up the electronic parking brake switch to apply the electronic parking brake, and the parking brake indicator light is ON in the instrument cluster .
When the vehicle is stationary, press the electronic parking brake switch downward while depressing the brake pedal to release the electronic parking brake, and the parking brake indicator light goes out in the instru- ment cluster. Automatically applied When the vehicle gear is switched from non-P gear to P gear, the electronic parking brake can be automatically applied, and the Driving and Operation | 135