Driving and Operation Start and close the automatic lane change assist During the vehicle's autonomous lane change process, the vehicle automatically performs ac- celeration and deceleration control based on the vehicle conditions in its own lane and the target lane. Halfway through the lane change, when halfway through a lane change, the automatic lane change assist system must be able to detect the outer lane marking of the target lane. If the outer lane markings of the target lane cannot be detected, the lane change is aborted and the vehicle returns to its original lane. Automatic lane change assist can only drive into one adjacent lane at a time.
If you need to continuously change lanes, the driver needs to turn on the turn signal light again after complet- After turning on the automatic lane change assist function, the following conditions must be met before you can drive into the adjacent target lane in the direction of turning on the turn signal: The driver holds the steering wheel with both hands. The vehicle is on the highway. Turn on the turn signal light. The camera and radar detect whether the target lane conditions meet the lane change requirements. Lane markings indicate lane changes are permitted. The camera and radar views are not blocked. No other vehicles were detected in the blind spot.
Halfway through the lane change, auto- matic lane change assist can detect the outer lane markings of the target lane. Attention Click the vehicle settings button on the center console > Driving Assist > Intelligent cruise. The automatic lane change assist function can be started and closed. When Integrated Adapted Cruise Control is ac- tivated, the automatic lane change assist func- tion can be used to change lanes: 1. drive into the adjacent target lane, the white arrow on the side of the IACC icon for lane change is ON, indicating that the system has judged that the corresponding side lane change can be executed. 2. Turn on the corresponding turn signal light. 3.
After the vehicle enters the adjacent target lane, the driver turns off the turn signal light. When starting a lane change, the meter will Attention When using the automatic lane change assist, the driver must always pay atten- tion to the forward driving route and the surrounding conditions, and be ready to take control of the vehicle at any time. After entering a new lane, the green arrow stops Driving and Operation | 153