BAIC — BAIC Bahrain Операционная инструкция: Руководство пользователя и обслуживание

Driving and Operation displays the maximum speed limit value. Integrated Adapted Cruise Control, automatic lane change assist and related functions may not work properly when encountering the fol- lowing conditions: Unable to accurately determine lane lines. Examples include excessive wear of lane marking lines, overlap of old and new marking lines, rapid lane marking light changes (lanes diverge, cross or merge), deep shadows on lane lines, pavement seams or other high-contrast lines on the road surface. Poor visibility (such as rain, snow, fog, dust, etc.) or other conditions that prevent the sensor from working. The camera or radar sensing area is inter- fered with, covered or damaged.

Drive on the hills. Close to the toll station. Driving on roads with sharp turns or bumps. Strong light (such as direct sunlight) blocks the camera's view. Other devices that produce co-channel interference may cause interference. Attention The vehicle is driving too close to the vehicle in front, thereby blocking the camera's view. Attention TSR is a driving assist function that may not be applicable in all driving situations. The driver must maintain control of the vehicle, drive cautiously, and be fully re- sponsible for maintaining a safe and legal speed. If using a third-party application for navigation, the TSR will not be able to read speed information from the navi- gation unit.

If the lane change conditions are no longer met during the lane change process (such as the lane marking changing to a solid line or the turn sig- nal being turned off prematurely), the system will continue to complete the lane change or return to the original lane, while displaying a message on the instrument panel and emitting an audible warning saying “Please take control of the vehicle in a timely manner”. If the driver is gripping the steering wheel at this moment, the automatic lane change assist function will exit, and control of the vehicle will be returned to the driver.

Click the vehicle settings button on the center console identification system can be ON/OFF and the alarm deviation value can be set. The Traffic Sign Recognition (TSR) system uses cameras to detect speed limit signs on the road or on the side of the road and displays them on the instrument panel, helping the driv- er observe the road speed limit signs. When a speed limit sign classified by vehicle type is detected, the TSR displays the speed limit value of a small car. When a maximum or minimum speed limit sign is detected, the TSR 154 | Driving and Operation