Driving and Operation Lane assist system LWDS When in the night, rain, snow, fog, shad- ow, and other environments, this function will have false positives and omissions. Please drive carefully. Under conditions of backlighting or glare, the “LDW” function of the vehicle may temporarily deactivate or generate false or missed alerts. The system will auto- matically resume normal operation after a period of time. Please drive with caution. Attention The Lane Departure Warning (LDW) system uses a camera to detect lane markings.
When the vehicle departs from the current lane with- out the driver signaling an intention to change lanes, the system provides visual and audible alerts to warn the driver that the vehicle is de- parting from the lane. Please drive with caution. Click the vehicle settings button on the center console > Driver Assistance > Lane Assis- tance. The lane departure warning function can be started/closed, and its alarm mode and alarm sensitivity can be selected. When the system is enabled, the LDW indicator light on the combi- nation instrument will illuminate. Display Interface This function serves as an auxiliary warn- ing and cannot replace the driver’s con- trol.
When a system failure is prompted, please contact a BAIC authorized dealer for processing. The system may generate false or missed alerts when there are road construction, standing water on the road surface, road cracks, or unclear lane markings. Please drive with caution. When the camera is covered by rain, snow, mud, ice, etc., this function will cause false alarms and false alarms. Drivers are advised to drive carefully and keep the camera area clean. Attention Outdoor: 24 10:37 p.m. Spot When the vehicle is started, the LDW switch is ON, and the vehicle speed is >60km/h, the LDW function is activated. When LDW is turned on, any of the fol- lowing conditions can be met to exit:
Vehicle speed >150km/h. ABS or ESC function activated. Turn off lane departure function. Lane marking lines on both sides are not visible. Attention The lane marking recognition and system inter- face display status are shown below: When lane markings are not recognized, the lane markings will not be displayed. 156 | Driving and Operation