Driving and Operation cally turn on and the wiping speed will change according to the amount of rainfall. The wipers and washer can only work when the keyless start/stop button is in "RUN" mode. When the system senses rainfall, the vehicle is powered on and the wiper com- bination handle switch is turned to the "AUTO" position, the windshield wipers will automatically turn on and change the wiper speed according to the amount of rain. In extreme conditions, such as driving on the highway in rainy weather, overtaking in the adjacent lane may cause splashing or large water mist.
It is recommended for the driver to manually switch the wip- er control lever to the “HI” (high-speed wiping) position to ensure driving safety. When the wiper combination handle is in the "LO" (low-speed wiping) or "HI" (high-speed wiping) position, the front wiper will wipe at the set speed, and the automatic sensing function does not work at this time. Attention In winter, snow and ice should be prompt- ly removed from the wiper arms and wip- er blades, including the areas involved when the wipers are working. When using an automatic car wash ma- chine to wash your car, do not put the wiper combination handle in the "AUTO" position, otherwise the wiper may be damaged.
The system should be turned off when the wipers are not needed. Attention Attention If strong light, infrared light, or objects are present above the rainfall/light sensor, the wipers may activate. Front Washing When the “Keyless Start/Stop” button is in the “RUN” mode, pushing down and holding the wash switch will activate the front washer func- tion. The front windshield washer nozzles will spray water, and releasing the switch will stop the water spray. The front wipers will continue to wipe for a few more times before stopping automatically. Attention When the windshield is dry, spray water without water.
If wiping is performed under low tem- perature conditions, make sure that the wiper blades are not frozen on the wind- shield. The washer can spray water continuously for up to 12s and then automatically stop. Attention Rain sensor When the system detects rainfall, if the “Key- less Start/Stop” button is in the “RUN” mode and the wiper control lever is in the “AUTO” position, the windshield wipers will automati- 178 | Driving and Operation