BAIC — BAIC Bahrain Операционная инструкция: Руководство пользователя и обслуживание

Driving and Operation When in this position, the rain sensor sensitiv- ity adjustment lever can be used to change the sensitivity of the rain sensor to the amount of rainfall. The wipers will automatically adjust the wiping frequency based on the amount of rainfall. OFF: stop MIST: single wipe Move the wiper combination handle downward to the MIST position, and automatically return to the position after releasing. The front wiper wipes once. Move the wiper combination han- dle downward to the MIST position and hold it. The front wiper wipes until you release your hand. The intelligent high-beam assist system has limitations in identifying the road environ- ment through the camera.

The driver should manually adjust the vehicle lighting according to the current lighting, visibility and traffic conditions in the following situations: Driving in fog or heavy rain. Driving on snowy weather or muddy roads. Driving in freezing rain and on dimly lit streets. There are pedestrians on the driving road or adjacent roads. the road. The lights of oncoming vehicles are blocked by fences, shrubs, isolation belts, etc. Driving on hilltops or potholes in roads. When making a sharp turn, if the oncom- ing light is blocked (such as a median). Attention When the driver turns on the fog lights, turn signals or makes an emergency turn, the light change will be suppressed.

The use of non-original windshield glass will adversely affect the intelligent high beam assist system. Attention Driving in rain Front Wiper HI: wipe steadily at high speed LO: wipe steadily at low speed AUTO: automatic wiper Driving and Operation | 177