BAIC — BAIC Bahrain Операционная инструкция: Руководство пользователя и обслуживание

Park Assistance Parking radar system fault alarm instruc- tions The following situations may cause false alarms or no alarms: Noise sources that are close to the frequen- cy range of the ultrasonic sensor, such as the vehicle horn, engine noise, exhaust Do not directly spray the sensor surface with high-pressure water such as a water gun, or use other methods to squeeze or impact the sensor surface, otherwise it may cause fault. The sensors of the parking radar system are precision parts. Do not remove, install or repair the sensors without authoriza- tion. Damage caused by removal, instal- lation or repair without authorization is not covered by the warranty.

When the surface of the Parking Distance Control sensor is covered by solid attach- ments such as ice, snow, mud, etc. for a long time, it may cause fault. Please clean it in time. Attention Radar malfunction reminder When the Parking Distance Control system is activated, if the system detects a fault mes- sage, the instrument cluster will sound a sound prompt and display a fault prompt interface. false alarms. In narrow spaces or when reversing on an incline, the system may detect railings, trees, or sloping surfaces, leading to false alarms. False alarms may occur when high-fre- quency radios or antennas are installed on or near the vehicle.

Unable to detect obstacles The ultrasonic sensors have blind spots when detecting obstacles. They cannot de- tect objects under the bumper, beneath the vehicle, or those that are too close or too far away. The Parking Distance Control system can- not detect small wire, cables, or mesh-like objects such as nets. It also has difficulty detecting soft objects that absorb ultrasonic waves, such as snow, cotton, or sponge. Additionally, it may not detect low objects like rocks, wooden blocks, or curbstones, as well as objects with unique shapes like pillars, small trees, bicycles, corner edges, foundation stones, or corrugated paper.

ultrasonic waves emitted by the sensors, causing them to be undetectable, including people wearing such clothing. In rainy and snowy weather, when the sensor surface is impacted by rain/snow, or freezes, or is dirty, no alarm or false alarm may occur. In hot or humid weather, the distance at which objects are detected may be reduced. If there are water droplets attached to the surface of the ultrasonic sensor, the sensi- tivity of the ultrasonic sensor will decrease, and the sensitivity can be restored by wip- ing off the water droplets attached to the ultrasonic sensor.

The Around View Monitor (AVM) is a comfort system, which is composed of four wide-angle cameras installed around the vehicle body and a AVM system controller. AVM can assist the driver to have a clear view around the vehicle when reversing, parking or turning, so as to tem driver in driving. 194 | Park Assistance