BAIC — BAIC Bahrain Операционная инструкция: Руководство пользователя и обслуживание

Park Assistance Panoramic imaging system exit conditions AVM includes the following main functions: 360 ° around view The controller seamlessly splices the imag- es of the four cameras arranged around the vehicle body to form a 360 ° around view, whose display effect is similar to the image taken from the air, and can present the im- age around the vehicle body by 360 °. Perspective switch Under the Multi-View Camera System, when you click the 2D/3D button in the multi-view splicing area, you can switch to 2D/3D mode to display the 2D/3D view angle of the vehicle.

- In 2D mode, under the Multi-View Camera System, when you click on the left (right) area of the multi-view trolley or turn on the left (right) turn signal light, the single view area can be switched to the left (right) view screen. - In 3D mode, under the Multi-View Camera System, when you click the camera buttons around the multi-view trolley, the single view area can be switched to the view screen of the cor- responding perspective. By clicking the Multi-View Camera button on the sidebar of the center console, you can enter the Multi-View Camera interface. Click this button again to turn off the Multi-View Camera System.

When the Multi-View Camera System is acti- vated, you can exit if any of the following con- ditions are met: There is no operation after shifting into P gear for 5s. When not in R gear, click the "Exit" button on the left side of the center console. When not in R gear, the vehicle speed is >30km/h. When not in R position, the voice is OFF. System fault If there is no operation after the turn signal light triggers the multi-view interface, and there is no operation within 5s after the turn signal light returns to the normal position, the Multi-View Camera interface can be automatically exited.

If there is no operation after an obstacle triggers the multi-view interface, and if there is no operation within 5s after the ob- stacle is not detected by the forward sensor, the Multi-View Camera interface can be automatically exited. Press the keyless start/stop button to "OFF" mode. AVM opening conditions When the keyless start/stop button is in "RUN" mode, it can be turned on if any of the follow- ing conditions are met: Shift into "R" gear. When the vehicle speed is the Multi-View Camera button on the steer- ing wheel. When the vehicle speed is voice is activated. When the vehicle speed is less than 25km/h, it is triggered by the turn signal.

When the vehicle speed is Multi-View Camera interface can be trig- gered when obstacles are detected. Park Assistance | 195