BAIC — BAIC Bahrain Операционная инструкция: Руководство пользователя и обслуживание

Take a vehicle fragile or sharp objects (such as glasses, ballpoint pens, etc.), otherwise the passengers may be injured. Seat belts must be kept clean at all times, as heavily soiled seat belts may cause the retractor to not retract smoothly. Many people believe that in the event of a mi- nor collision, they can support their body with their own hands to avoid injury. This is a wrong view! After a vehicle collision, a driver or passenger who is not wearing a seat belt will still move forward at the speed before the collision due to inertia.

However, the vehicle is not moving at the same speed as the driver and passengers at this time, which may cause injuries to the driv- ers and passengers. Even if the vehicle speed is very low, the force acting on the human body is very large in the event of a frontal collision. In this case, Drivers and passengers cannot support their bodies with their hands; drivers and passengers who are not wearing seat belts will be thrown forward and violently hit the steering wheel, dashboard, front windshield or anything on the way forward.

Seat belt reliability check Danger Make sure that the lock socket is not blocked by foreign objects, otherwise the lock tongue cannot be inserted into the lock latch. The seat belt tab must be correctly inserted into the buckle and locked. Wearing the seat belt incorrectly will affect its pro- loose, or the retractor function is faulty, the seat belt will not be able to provide protection in the event of an accident. Therefore, all parts of the seat belt should be checked regularly to see if they are functioning properly. After a serious collision, please be sure to go to a BAIC- authorized dealer to replace the used seat belt or the seat belt that has been stretched and deformed.

Even if there is no obvious deformation in ap- pearance, it still needs to be replaced. In addition, check the seat belt fasteners. It is strictly prohibited to repair, disas- semble, and install parts of the retractor or seat belt by yourself. The seat belt shall not be The seat belt retractor will lock the sliding function of the seat belt when the following three conditions are encountered: When quickly pulling the seat belt out of the retractor. When the vehicle decelerates rapidly. When the seat belt retractor tilts at a large angle. To check the reliability of the seat belt, grasp the upper part of the seat belt and pull quickly. At this time, the retractor should lock the seat belt.

If the retractor cannot lock the seat belt, please go to a BAIC authorized dealer for re- pair. Seat Belt Pre-tightening Force Limiting Function * maintenance of seat belt components. 34 | Take a vehicle