Take a vehicle The seat belts of some models are equipped with a pre-tensioning force limiting device. The purpose of installing this device is to ensure that the seat belt can tighten the occupant's body in a collision accident. When the severity of a collision reaches a certain level, the pretension- ing force limiting device may be activated, and the retractor will tighten the seat belt to slow down the forward movement of the occupants. If the tightening force exceeds a certain limit, the force-limiting device will relax the seat belt appropriately to reduce the force acting on the body.
When the pre-tensioning force limiting device is triggered, white smoke may be emitted, which is normal and does not mean that the In case of any of the following conditions, please immediately send the car to the autho- rized dealer of BAIC for testing: The front of the vehicle was involved in an accident, but the seat belt pretensioners were not operating. The seat belt pretensioner and surrounding parts are scratched, cracked or otherwise damaged.
When carrying out any inspection, maintenance or other work on a vehicle equipped with a pre-tensioner device and a seat belt retractor, please go to a BAIC authorized dealer to carry out the work, otherwise the pre-tensioner device may not work properly in the event of an accident. When the pretensioner needs to be scrapped, relevant safety regulations must be followed and authorized dealer of BAIC is familiar with these regulations and may provide you them. Warning Seat belts equipped with a pretensioning function can only be used once. The seat belt must be replaced with a new one after the pretensioner has detonated.
Seat belt pretensioners become very hot after deployment, so do not touch related parts for several minutes after deployment. Warning Unauthorized repairs of seat belt retractors by unauthorized deal- ers of Beijing Automotive or unqualified individuals, as well as improper use of seat belt retractors, can significantly increase the potential risks of casualties in accidents. Maintenance of seat belts Do not repair, remove or install seat belts or seat belt seat retrac- tor components yourself. Regularly check that the seat belt and all its components (such as buckles, tongues, retractors and webbing) are working properly.
If you find damage to seat belt parts, cracked webbing, or other damage, replace the entire seat belt assembly. Repair and scrapping of seat belt pretensioner device* Take a vehicle | 35