. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS 3 - 58 5. If the oil level is below the L line, add o il through oil filler (F ) at op of the hy draulic tank REMARK The oil le vel will var y depending upon the oil temperat Accordin gly, use th e following a s a guide: Befor e starting o peration: Be tween H a nd L (Oil te mperature 10 to 30°C ( 50 to 86°F Norm al operatio n: Around H (Oil te mperature 50 to 80°C ( 122 to 176 °F)) Check Dust Indicato r at the rear of the cab and check that the red 1. Ope pisto the a 2. If the imm For "CH (PAG 3. After pres origi 1.
Ope n the cover and red n is not sho wing in the part of dust indicator (1 ) show n by rrow. red piston has appeared, clean or replace the element ediately. details of the method of cleaning the element, see 2. If the red piston ediately. details of see ECK, CLEA N AND REP LACE AIR CLEANER ELEMENT E 4-17)". 3. After checking, cleaning, or replacing t he air clean er element, s the knob o f dust indica tor (1) to re turn the red piston t o its nal position .