. OPERATION COLD WEATHER OPERATION AFTER DAILY WORK COMPLETION WARNING 3 - 114 Performing idle-r unning of the tra cks is dangerou s, stay we ll away fro m the tracks To prevent mu d, water, or the u ndercarriage f rom free zing and making it i mpossible for the m achine t o move on the following morni ng, observe the followin g precautions. body. In particular, wipe the hydraulic cylinder rods clean to Remove all the mud and w ater from the m achine body.
In p articular, hydraulic cylinder rods clean to prevent dam age to the seal caused b y mu d, dirt, o r drops of water on t he rod fr om gettin g inside t he s eal Park the ma chine on hard, dry groun I f this is imp ossible, park th e machin e on The boards prevent the trac ks from fr eezin g to the ground, an d allow th e machin e to be mo ved the next morning. Open the dr ain valve and dr ain any w ater collecte d in the fu el system t o preven t it f rom fr eezing. Fill the fuel t ank to capacity. This minimize s moistu re condensation in the tank whe n the temperature drops.
After operati on in water or m ud, remove w ater fro m undercarriage as d escribed below to extend undercarriage service life. 1. Swing 90° with engine at low idle and bring the work equipment to the side of the track. 2. Jack up the machine until the track is raised slightly from the ground. Rotate the track under no load. Repeat this procedure on both the left and right sides. service life. 1 . Swing 90° with engine at lo w idle an d brin g the wor k equipme to the side of the track. the track is raised slightly from t 2 . Jack up th e machine until tate the track u nder no lo ad.
R epeat th is procedu left and right s AFTER COLD WEATHER SEASON When the seas on changes an d the weather become s warmer, do as follo Replace the fuel and oil for all parts with o il of the viscosity s pecified. For details, see "RECOMMENDED F UEL , COOLA NT, AND LUBRICA NT (PAGE 4