Komatsu — AFTER STORAGE

. OPERATION LONG TERM STORAGE LONG TERM STORAGE the DURING STORAGE WARNING AFTER STORAGE NOTICE before using it. 3 - 115 BEFORE STORAGE (1 month or more), set the machine in NOTICE When storing the machine posture shown in the diagr am on the right to protect the cylinder rod. (To prevent rusting of the c ylinder rod) When keeping in long-te rm storage (more than one month), s tore as follows. Clean and wash all pa rts, then store the machine indoors. If the machine has to b e stored outdoors, se lect level ground and cover the machine with canvas. prevents moisture from collecting. the oil before storage. d with grease. Fill the fuel tank.

This Lubricate and change Coat the exposed por tion of the hydraulic cylinder piston ro Disconnect the negati ve terminals of the battery and cover it or remove it from the m achine and store it se parately. Lock each control lev er and pedal with the lock lever and lo ck cover. Set the stop valve to t he LOCK position on machines ready for attachments. Instal l the blin d plugs to th e elbows. Set the selector valve position. on the machines which can install attachments to the "Crusher or general attachment" achment" To prevent corrosion, be sure to fill the cooling system with S upercoolant (AF-NAC ) or permanent type a ntifreeze (density between 30% and 68%).

If it is necessary to perform the rust-prevention operation while the m achine is indoors, open t he doors and windows to improve ventilation and prevent gas poisoning. During storage, opera te and move the machine for a short di stance once a month s o that a new film of o il will coat moving parts. At the same time, also charge the battery. onditioner.

For machines equipp ed with an air conditioner, run the air c If the machine has been st ored without carrying out the monthly rus t-prevention operation, consult y our Komatsu distributor When using the machin e after long-term storage, do as follow Wipe off the grease fr Add oil and grease at When the machine is s tored for a long period, moisture in the air will mix with the oil. Check the oil before and after starting the engine. If there is water in the oil, change all th e oil.