Komatsu — CLEAN, CHECK RADIATOR FINS, AIR COOLER FINS, OIL COOLER FINS, CONDENSER FINS

. MAINTENANCE MAINTENANCE PROCEDURE white, it is contact your the grease CLEAN, CHECK RADIATOR FINS, AIR COOLER FINS, OIL COOLER FINS, CONDENSER FINS WARNING and leaves from 4 - 55 CHECK SWING PINION GREASE LEVEL, ADD Prepare a scale. 1. 2. 3. 4. 1. Remove bolts (1) ( 2 bolts) on the top of the revolv remove cover (2). 2. Insert a scale into the grease and check that the grease in the porti on where the pinion passes is (0.2 in). Add more grease if necessary. se is milky white. If it is mil ange the grease. Please r. 3. Check if the grea necessary to ch Komatsu distributo The total amount o f grease is 10 liters (9.1 kg) (2. lb]). th bolts (1). 4.

Install cover (2) wi LUBRICATE SWING CIRCLE uipment to the ground. 1. 2. 3. 1. Lower the work eq 2. Using a grease p ump, pump in grease throug rrows. (2 places) fittings shown by a 3. After greasing, wip e off any old grease that was If compressed air, high-p ressure water, or steam hit your bo dy directly, or they cause dirt or dust to be blown up, there is a h azard o f serious injury. Always use safety glasses, dust mask, o r other protective equipment. NOTICE d air, keep a distance from air nozzle, to prevents damage to the fins. When use the compresse d air, keep a distance from air no T o prevent damage to th e fins, apply compressed air from and appropriate distance.

Damaged fin s may cause water leaka ge or overheating. In a dusty s ite, check the fins daily, irrespecti ve of the maintenance interval. 1. Open the cover at the rear of the cab and the batt at the left side of t he machine. rews (1) and remove net (2). 2. Remove 4 wing sc 3. Use compressed air to clean the mud, dust, an the radiator fins, o il cooler fins, and condenser fi Steam or water m ay be used instead of compre 4. Check the rubber hose. Replace with a new one found to have crac ks or to be hardened by agin Also, check hose clamps for looseness. 5. After completing in spection and cleaning, install