MAN — MAN DD13 DD15 Engine Application Installation Manual

ENGINE ELECTRONIC CONTROLS Injector Harnesses (DDC supplied) Vehicle Interface Harnesses (OEM supplied) 21–pin Harness 31–pin Pigtail Harness Engine Sensor Harness (DDC supplied) DPF Harness (DDC supplied) 14.6.1 INJECTOR HARNESSES The harnesses are installed at the factory and are delivered completely connected to the injection units and the MCM. 14.6.2 VEHICLE INTERFACE HARNESS The VIH must be provided by the OEM. The VIH plays several critical roles as follows: Facilitates the communication of other systems and CPC with the engine MCM via CAN link. Provides feedback from DPF sensors. Transmits MCM and CPC output signals to the appropriate devices.

Provides 12V power and ground to the MCM and CPC modules. The VIH must contain the wires, fuses, relays, switches, connectors, and communication link necessary to perform the aforementioned roles. The VIH must be completely detachable from the engine and all devices it connects to with locking weather-proof connectors. NOTE: The MCM must be wired directly to the battery. Connection to reverse polarity will damage the system if not properly fused. A schematic of a DDEC VI VIH is shown in the following illustration. 14-6 All information subject to change without notice. DDC-SVC-MAN-0073 Copyright © 2009 DETROIT DIESEL CORPORATION