MAN — MAN DD13 DD15 Engine Application Installation Manual

DD PLATFORM APPLICATION AND INSTALLATION MANUAL DOC - Diesel Oxidation Catalyst DPF - Diesel Particulate Filter 1. DOC Inlet Temperature Sensor 4. DPF Outlet Temperature Sensor 2. DOC Outlet Temperature Sensor 5. DPF Outlet Pressure Sensor 3. Sensor Junction Box 6. DPF Inlet Pressure Sensor Figure 14-7 Sensor Locations for the DOC and DPF 14.8 WELDING Prior to any welding on the vehicle or equipment, the MCM must be disconnected from the battery and chassis. This may be accomplished by removing connectors from the battery or by installing switches which must remain closed for 30 seconds after ignition is off for non-volatile data. Ground cable must be in close proximity to welding location.

All information subject to change without notice. 14-11 DDC-SVC-MAN-0073 Copyright © 2009 DETROIT DIESEL CORPORATION