DD PLATFORM APPLICATION AND INSTALLATION MANUAL Figure 17-7 Net Belt Tension at the 90° Position 2. Determine L by using the formula L = L 1 + .99 in . In our example, we use the table to find L 1 for the vibration damper pulley group Z53700903 (8–groove section). This value is .84 in. Therefore, L = .99 in. + .84 in. = 1.83 in. (.15 ft.) 3. Find F using the formula F = M / L . In the example, F = 3629 lb·ft/.15 ft. = 24193 lbs ( F ) . 4. Therefore the net total static belt tension (each leg of the belt x 2) should be no more than lbs at the 90° position of the 8–groove section of the vibration damper pulley.
If there are fan belts and other accessories, then the combined net force should be calculated at its resultant angle. Contact Detroit Diesel Application Engineering for assistance. All information subject to change without notice. 17-9 DDC-SVC-MAN-0073 Copyright © 2009 DETROIT DIESEL CORPORATION