MAN — MAN DD13 DD15 Engine Application Installation Manual

AUXILIARY POWER UNITS (APU) 18.1 AUXILIARY POWER UNITS (APU) Auxiliary Power Units (APU) are optional systems, either factory installed or after-market, that are driven by an independent power source and provide electricity (either 12-volt, 120-volt or both) and HVAC functions for on-highway trucks to eliminate excessive engine idling during long duration or over-night stops. Some states have regulations limiting idle time to no more than five minutes, at which point the main vehicle engine must automatically shut down. For an overnight stay in a sleeper cab, HVAC functions or electrical power are often required for driver comfort. NOTE:

The installation described herein is specific to the ThermoKing TriPac APU installed with a Detroit Diesel DD15 engine. These guidelines should be applicable to other brand or model APU’s. Please confirm the installation requirements for different model APUs with Detroit Diesel Application Engineering. 18.2 APU DESCRIPTION An APU is typically comprised of a small diesel engine, an in-cab control panel, a thermostat, an alternator, an air conditioning circuit, a heater circuit, and in some cases, a generator to provide 120-volt power.

The APU is engaged when the main vehicle engine is shut off to provide heating and cooling, charge the batteries and provide 12-volt or 120-volt power for small appliances, laptop computers, etc. The APU can be set up to start automatically when the engine is stopped or can be switched on manually. Some APUs may also have a battery monitor function which will engage the APU while the main vehicle engine is running to charge the batteries in the event of an alternator failure. 18-2 All information subject to change without notice. DDC-SVC-MAN-0073 Copyright © 2009 DETROIT DIESEL CORPORATION