GLOSSARY Standpipe(s) Deaeration tube(s) located in the integral radiator deaeration tank to vent the radiator core of gases. Also been called "J" tubes. Substrate Core material used in diesel particulate filters that is made of ceramic, silicon carbide, or sintered metal. Suction Fan A fan that pulls air through the core. Surge Tank See "Deaeration Tank". Total Base Number Measures an oil's alkalinity and ability to neutralize acid using a laboratory test (ASTM D 2896 or D 4739). TBN is important to deposit control in four-stroke, four cycle diesel engines and to neutralize the effects of high sulfur fuel in all diesel engines.
Temperature Stability or Drift The ability of the cooling system to maintain coolant temperature at light loads and/or engine speed or long vehicle drift (coasting). An important system characteristic for good heater operation during cold ambients. Top Tank See "Deaeration Tank" Top Tank Temperature See "Engine Coolant Out Temperature". Water Pump Inlet Restriction The pressure (suction) at the inlet to the water pump (pressure cap removed) which represent up-stream restriction. G-6 All information subject to change without notice. DDC-SVC-MAN-0073 Copyright © 2009 DETROIT DIESEL CORPORATION