ACCESSORIES Clock Date Alarm Set the time as follows: Press and hold down either the “+” or “-” button to change the time to the proper setting (note “PM” indicator in upper left corner of display). After holding down either button for three seconds, the rate of change will increase from slow to fast. The clock will start keeping time as soon as either button is released. A flashing display indicates that power has been interrupted to the clock, and all functions will need to be reset. Enter the date mode by pressing the “Select” button once. Set the current month using the button, and the date by using the button (the display will automatically return to the clock mode after a few seconds).
Press the “Select” button twice to switch to the alarm mode, which is indicated by the alarm symbol on the left side of the display. The alarm is set in the same manner as the time (again, be careful to note the status of the indicator). Use the “On/Off” button to turn the alarm on and off while in this mode. The alarm symbol flashes when the alarm is off, and turns to steady when the alarm is turned on. 3 The clock mode is the default display, which means the display will return to this mode after a few seconds from every other mode except from elapsed time mode. When the alarm is turned on, the alarm symbol is displayed while in the clock mode.
To silence the alarm, press either the “Select” or “On/Off” button. 3-8 Y53-1203-1D1 (02/14)