PACCAR Inc. W900, T660, T800, C500, 963 — Clock

ACCESSORIES Elapsed Time Auxiliary Display Press the “Select” button three times to switch to the elapsed time mode, which is indicated by “ET” in the lower left corner of the display. Similar to the alarm symbol, the flashes when the elapsed timer is turned off, and is steady while the timer is turned on. Turn the elapsed timer on and off by using the “On/Off” button. When the elapsed timer is on, is also displayed while in the clock mode. To reset the elapsed time, press either the “+” or the “-” button while the timer is off. Unlike the other modes, the display will stay in elapsed time mode until the “Select” button is pressed.

This mode has no function at this time and should be ignored. The display is always on. The display can be set to four levels of brightness by pressing both the “+” and “-” buttons at the same time. 3 (02/14) Y53-1203-1D1 3-9